Performence Features:
1. The integrated base and bed casting has undergone a strict aging treatment, so high accuracy and rigidity is ensured.
2. High precision cartridge type spindle is equipped with a linear cylinder and collet chuck; the spindle rotates smoothly at high speed and Max. Speed is 500 rpm/min turning roughness is up to Ra0.8~0.4.
3. Precision hardened dovetail guideways improve the total rigidity of lathe so that the lathe has high precision and runs smoothly.
4. Precision pretensioned ball screw is located between guideways; side torque is eliminated. Imported bearings especially for screws are used and smooth transmission is ensured.
5. Feed screws in longitudinal and cross direction are directly connected with AC servo motors through zero clearance shaft couplings. High accuracy is ensured in transmission.
6. The unique dovetail comb type tool block ensures easy setting, quick and precise tool change and maximum repeatability.
7. The high performance intermittent centralized lubrication system lubricates the machine bed guideways and X/Z-axis screws in time.
8. The NC controller has color display and USB port, so data transfer is simple.
9. The external electric cabinet is easy to service. The separate rear mounted coolant tank and chip box ensure fluent chip disposal and easy chip removal.
10. The machine is jointly driven mechanically, electrically and pneumatically. Famous brand pneumatic and electric elements used on the lathe operate reliably.
11. Full enclosed stainless steel guard ensures safe and friendly operation.
Technical parameter:
| Item | Unit | CK20 | |||
| Capacity | Max swing over bed | mm | φ240 | ||
| Max swing over slide | mm | φ120 | |||
| Max turning dia.over tool block | mm | φ70 | |||
| Max bar dia. | mm | φ20 | |||
| Max machining length | mm | 150 | |||
| Spindle | Type of spindle nose | / | |||
| Size of spindle nose | mm | φ45 | |||
| Spindle thru-hole | mm | φ26 | |||
| Thru-hole of spindle draw bar | mm | φ21 | |||
| Max speed of spindle | rpm | 5000 | |||
| Work chucking mode | Std. pneum. Collet chuck Opt.: hyd. collet chuck/ 3-jaw chuck | ||||
| Feed | travel X/Z | mm | 200/180 | ||
| Repaid traverse X/Z | m/min | 15/15 | |||
| Tool block | Type of tool post | Dovetail comb tool block | |||
| Tool section: turning/boring | mm | 12x12/φ25 | |||
| Tooling height of tool | mm | 35 | |||
| Motor | Power of spindle motor | kW | 2.2/3.7 | ||
| Torque of spindle motor | Nm | 14/23 | |||
| Power of motor X/Z | kW | 0.75/0.75 | |||
| Torque of motor X/Z | Nm | 3.5/3.5 | |||
| Power of coolant pump motor | W | 150 | |||
FANUC 0i mate-TD
High precision angular contact ball bearing imported from Japan (front: 3; rear: 2)
Bearings especially for screw imported from Japan
Medium frequency hardened and plastic-coated ways(dovetail type)
precision pretensioned ball screw
pneumatic draw down collet chuck
Linear cylinder
Servo spindle
Automatic lubrication system
Coolant system
pneumatic system
Standard tool post
Automatic pull feeder
Standard chuck
Machine tool adjustment
Tricolored light of machine
Full enclosed protection
Optional equipment
GSK/SIEMENS/KND controller
4" solid hydraulic 3-jaw chuck from Taiwan(CK20/30)
5" solid hydraulic 3-jaw chuck from Taiwan( CK30)
Automatic chuck
Domestic ball screw
5" hollow rotating air cylinder
Pneumatic
Spindle disc brake unit
Pneumatic/electric drilling/milling unit
Front/rear air blowing
Special tool post
Special chuck
Feeder equipment
Automatic feeding bar machine
Linear guide way Hiwin
